Stainless Steel Buttweld Fittings
Mabrook Hardware LLC - we are leading importers and stockist of Stainless Steel Buttweld fittings - SS Elbows, SS Tee, SS End Cap, SS Conc. Reducers, SS Ecc. Reducers
SS Buttweld Fittings are used in a piping system, for changing direction, branching or changing pipe diameters which are mechanically connected to the system. There are many different types of fittings and they are the same in all sizes and schedules as the pipeline connected.
TYPES OF BUTT-WELD FITTINGS AVAILABLE WITH US:
• SS Elbows
• SS Tee
• SS End Cap
• SS Conc. Reducers
• SS Ecc. Reducers
SS Buttweld Fittings are used in a piping system, for changing direction, branching or changing pipe diameters which are mechanically connected to the system. There are many different types of fittings and they are the same in all sizes and schedules as the pipeline connected.
TYPES OF BUTT-WELD FITTINGS AVAILABLE WITH US:
• SS Elbows
• SS Tee
• SS End Cap
• SS Conc. Reducers
• SS Ecc. Reducers
-
- SS BUTT WELD ELBOWS
-
- SS BUTT WELD TEE
-
- SS END CAP BUTT WELD
-
- SS BUTT WELD CONC
-
- SS BUTT WELD ECC
Specifications
SS Buttweld Elbows
We offer a wide range of MS Buttweld Elbows from the size of 1/2" to 24" in 45 deg & 90 deg.
The function of an elbow is to change direction of the flow in a piping system. The 45°, 90° and 180° elbows, all three are available in the "long radius" version, and in addition the 90° and 180° elbows both are available in the "short radius" version.
The Elbows are available in thickness of SCH Std, SCH 40, SCH 80 and SCH160
SS Buttweld Tee
We offer a wide range of SS Buttweld Tee from the size of 1/2" to 12".
The primary purpose of a Tee is to make a 90° branch from the main pipeline. Generally, there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee (or straight tee) is used as the branch & has the same diameter as the run-pipe. The reducing tee is used as the branch has a smaller diameter as the run-pipe.
The TEES are available in thickness of SCH Std, SCH 40, SCH 80 and SCH160
SS Buttweld End Cap
We offer a wide range of SS Buttweld End Cap from the size of 1/2" to 12".
Basically a cap will be used to shut down the ends of a pipe. The Cap, as it is shown in the image below, is available for all pipe dimensions, and is sometimes also used for other purposes.
The large variations of caps, are the so-called ellipsoidal or dished heads. They are used to close pipes of large diameters, and are similar to those used for constructing vessels.
The End Caps are available in thickness of SCH Std, SCH 40, SCH 80 and SCH160
SS Buttweld Conc. Reducers
We offer a wide range of SS Buttweld Reducers from the size of ½”x ¾” to 10”x12".
Reducers are used to change the pipe diameter in one direction. Standard there are 2 possibilities, the concentric reducer, is usually used in vertical pipe lines, and the eccentric reducer that is used in horizontal pipe lines.
The Conc. Reducers are available in thickness of SCH Std, SCH 40, SCH 80 and SCH160
SS Buttweld Ecc. Reducers
We offer a wide range of SS Buttweld Reducers from the size of ½”x ¾” to 10”x12".
Reducers are used to change the pipe diameter in one direction. Standard there are 2 possibilities, the concentric reducer, is usually used in vertical pipe lines, and the eccentric reducer that is used in horizontal pipe lines.
The Ecc. Reducers are available in thickness of SCH Std, SCH 40, SCH 80 and SCH160
