GROOVED COUPLINGS
We offer a wide range of Grooved Couplings from the size of 112” to 12".
There are two types of basic grooved couplings.
Flexible grooved coupling that allows a limited amount of angular movement.
Rigid grooved coupling that does not allow movement and is similar to a fanged or a welded pipe joint.
Certificate: UL Listed/ FM Approved
Material: Ductile Iron
Bolt & nut: Carbon steel
Gasket: EPDM
Temperature: ≤ 107°C
pressure: 300 psi (2.07 MPa)
Surface: Red painting/ hot dip galvanized
GROOVED FLANGES
We offer a wide range of Grooved Flanges in PN16 and CL150 from the size of 112” to 12".
Grooved Flanges are used for joining pipes, valve and pump together by grooved, welded, or screwed type. It provides an easy access for installation, cleaning and modification of the leak tight structure.
Grooved flange is used for connecting fire protection pipeline of conveying water and suppression agent in fast installation.
Certificate: UL listed/ FM approved
Material: Ductile Iron
Face: Flat face/ Raised face
Temperature: -30°C to 300°C
pressure: Class 150/ PN16
Surface: Red paint/ hot dip galvanized
GROOVED REDUCERS
We offer a wide range of Grooved Reducers from 112”x114” to 8"x6”.
Grooved Reducers are used to change the pipe diameter in one direction. Standard there are 2 possibilities, the concentric reducer, is usually used in vertical pipe lines, and the eccentric reducer that is used in horizontal pipe lines.
These reducers are available in both side grooved ends and also in one side grooved & another side threaded ends.
Certificate: UL Listed/ FM Approved
Material: Ductile Iron
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
GROOVED ELBOWS
We offer a wide range of Grooved Elbows in 45° and 90° from the size of 112” to 12".
Grooved Elbows are used to change the flow direction in a piping system.
Certificate: UL Listed/ FM Approved
Material: Ductile Iron
Temperature: -30°C to 300°C
pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
GROOVED FLANGE ADAPTORS
We offer a wide range of Grooved Flange Adaptors in PN16 and CL150 from the size of 112” to 12".
Grooved Flanges Adaptors are used for joining pipes, valve and pump together by grooved, welded, or screwed type. It provides an easy access for installation, cleaning and modification of the leak tight structure.
Grooved flange is used for connecting fire protection pipeline of conveying water and suppression agent in fast installation.
Certificate: UL listed/ FM approved
Material: Ductile Iron
Face: Flat face/ Raised face
Temperature: -30°C to 300°C
pressure: Class 150/ PN16
Surface: Red paint/ hot dip galvanized
GROOVED MECHANICAL TEE
We offer a wide range of Grooved Mechanical Tees in threaded and grooved branches from the size of 2x112” to 8x6”
Certificate: UL Listed/ FM Approved
Housing: Ductile iron
Bolt & nut: Carbon steel
Gasket: EPDM
Temperature: ≤ 107°C
pressure: 300 psi (2.07 MPa)
Surface: Red painting/ hot dip galvanized
GROOVED TEE
We offer a wide range of Grooved Tees from the size of 112” to 12”
The primary purpose of a Tee is to make a 90° branch from the main pipeline. Generally, there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee (or straight tee) is used as the branch & has the same diameter as the run-pipe. The reducing tee is used as the branch has a smaller diameter as the run-pipe.
Certificate: UL Listed/ FM Approved
Material: Ductile iron
Temperature: -30°C to 300°C
pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
